Football goal do it yourself from water pipes
Football goal do it yourself from water pipes.
It is very simple to make a football goal with your own hands from water pipes. We will tell you very simply to make a football goal on your own from the available tools that can be found in almost any garage. We advise you to read carefully, as we offer you a complete scheme of making a football goal on your own.
Almost everyone has water pipes, but if they are not available, they can be purchased at a nearby hardware store or plumbing shop.
Solder the gates of water pipes.
Before you make a football goal out of plastic pipes with your own hands, you need to collect the necessary material. So, you need a pipe with a diameter of ½ can and more. In the following quantity and length:
300 mm - 4 pieces.
500 mm - 2 pieces.
600 mm - 4 pieces.
850 mm - 2 pieces.
Among other things, you will need 6 knees at 90 degrees and four tees, also with access to 90 degrees. In addition, you need to buy a net for the gate.
As for the tool, you will need the following:
Pipe cutting scissors.
Soldering iron for welding pipes.
For further work, you should apply all your skills. So, you need to take two pipes with a length of 500 mm. On both sides of the weld two tees. In this case, both tees should be directed strictly to one side. Further, on tees weld on both sides of the pipe sections of 300 mm. On the edges of the weld knee. The direction of the knee should be in the same direction as the tee. As a result of these actions, you should have two blanks.
After that, you should take two pieces of pipe, 600 mm long. They should be combined into a single structure with an angled bend.
In the next step, we need to connect these corner pieces with the previous ones. This is done with the help of soldered corners.
Now it is necessary to connect among themselves tees, which turned against each other. Measure out with a tape measure, suitable pipe section and weld everything together.
In conclusion, it remains to tighten the grid. Mesh is fastened with special plastic clips. The grid is selected with small cells.
So, now you know how to make a football goal with your own hands. They can be fixed to the ground on the same principle as the gates of plastic sewer pipes.
How to make a grid
The easiest option is to buy a finished mesh. But the net for the football goal with their hands allows you to connect all their creative potential. Consider two options for how to weave it:
In this case, you need to know how to lash the fishing net. For this you need to have a shuttle and a wooden plate with a set of loops. For weaving can go a few evenings. For the basis of used nylon thread. It is resistant to moisture and heat. Moreover, with a strong blow to the ball, it will not break. With all the complexity of weaving the net on the principle of the fishing net, a higher-quality result comes to the fore.
The second method is much easier than how to make a net for a football goal with their own hands. To do this, use the usual clothesline. Holes are made in the frame of the door or hooks are screwed through which the rope is pulled. At the same time should be stretched vertically and horizontally. All rope crossing points must be securely fixed between each other. Cell size can be 150 mm.
So, here we have considered all the features of how to make a football goal with their own hands. We considered their varieties, as well as different technologies. But do not dwell on this. You can always connect your imagination and take absolutely new ideas as a basis. By the way, you can share them in the comments to this article. We hope that this article has helped you understand this issue. We will be grateful if you tell about this article in social networks.